Lamicall Cell Phone Ring Holder Stand – Phone Finger Gip Kickstand, 360° Rotation Polished Metal Grip for Magnetic Car Mount, Compatible with iPhone 16/15/14 Pro Max, Android Smartphone Accessories

It’s awesome if you install it right!!
I’ve had this stuck to my phone for a few months now, and it’s been perfect. I constantly have my phone dangling from only this on one finger as I’m carrying other things, and it’s been great. These people talking about it coming off most likely didn’t clean/prep correctly. That alone will be a deciding factor, so do it right and you’ll be fine.Doing it right:-Clean the surface first. (You can figure that part out.)-Wipe with alcohol.I don’t remember if it came with alcohol wipes, but if not, then use a first-aid wipe or rubbing alcohol (diluted about 1:1 with water if it’s the strong stuff.)-Apply.I don’t understand the purpose of the clear sticker, but I applied it anyway, and so should you. But do it without touching the top, or else wipe it again before applying the ring.-Now leave it alone.You need to let the adhesive set, so don’t go swinging your phone around by the ring right after you put it on. Leave it alone at least overnight, and then you should be good.

Lessens tendon pain for me
Only phone ring I like and helps me to minimize carpal tunnel.Ring looses it’s stiffness in a few months and it’s still fine to use but I’ll usually replace it and newer one helps relieve hand pain.

Love them but you absolutely cannot remove & reuse them
*2ND UPDATE*I don’t recommend this.I purchased this in July of 2022. As mentioned in my 2 previous reviews, it’s a love hate. I’ve had this one stuck on my phone – directly on, no sticker barrier like they say to do since they does NOT work – and today it broke. I added a video of what I was left holding. The coating was getting on my hands too. It was on there for about 8 months. About 3 months ago the stand stopped working as well. It wouldn’t hold the phone up so basically it could only be used when holding the phone. The biggest issue I have is that now I have the other piece of metal still stick on my phone case and it’s a very nice OtterBox case. I have no idea how to remove it.*UPDATE*As listed below, in my original review, this is my third time buying one but it’s very much a love/hate relationship. The first 2 I bought I stuck them directly onto the phone case but this one came with a clear sticker type thing that it says to put on the phone and then stick the ring onto it, instead of directly onto the phone or phone case. I followed the directions and within 24 hrs it has already come off (as pictured). I’m not surprised. It’s just a sticker so of course it didn’t stay on. So either you use the clear sticker and it comes off in a day or you stick it directly to the phone/case and you’ll likely never get it off (unless you’re ok damaging them). I won’t be purchasing any more of these so I’ve changed my rating to 1 star.*INITIAL REVIEW*I absolutely love these! BUT, I’m about to have to buy a 3rd one because there is no way you can get them off of your existing phone case without damaging the case or the ring. If you do manage to get it to come off, you can’t get the sticky part to come off so that you can use a fresh one. Which means you’d have to keep layering them up and that’s not only tacky but it will greater problems with how far it sticks out and how well it actually stays on. The first one I had was for a phone that ended up breaking and when I replaced it I upgraded my phone. I got a new case for the new phone and couldn’t get the ring off of the old case so I bought a second one. Now, my current phone case broke on the side which means I need to replace it and I can’t get this 2nd ring to come off of the case. SO I have to buy another one. I can’t imagine they’ll fix this issue because either they can’t or they won’t because it brings in more revenue if you have to replace them each time something like that happens.Aside from that issue, I love these. The ring makes it much more convenient for me. When I’m holding my toddler I can easily switch from holding my entire phone to holding just the ring part so I don’t drop it or I can get a safer grip than I could with other types holders. The ability to use it as a stand is so convenient! The color does wear off and show the silver undernear but that doesn’t bug me.I have a toddler and being able to

Broken after 2 months
Was so great until the ring broke off just shy of 2 months after purchase. I loved it until then.

👍

3rd & final updateI finally purchased a new phone last month, Feb 2023, and needed a new phone cover and ring holder to go with it. So naturally I bought this one again. I bought 2 different phone covers and rings to go on them. The surface of one cover doesn’t hold the sticker that goes in between the cover and the ring so I’m going to try to super glue that one to hold the ring in place. It’s just the material of the cover. My other one works fine although the sticker is coming loose in a few places. Trimming it to be the ring size might be better but I didn’t think of it. If I have to replace it more than once I’ll super glue it too as it worked well for my old phone. Aside from that, I love everything about this ring.The old ring on my old phone still hasn’t fallen apart though it looks nothing like it did when I first bought it. It’s remained the same from my review in 2021 and it still works. I’ve added a side-by-side photo of my old and new ring holder. I’ll always keep coming back to this one; it has served me well2nd UPDATEIt is now black Friday in 2021 and i am STILL using my first ring from Lamicall. It still works well although i am looking to purchase a new one in the next 6 months or so, which will be the exact same one as i currently have.Since my last update, my ring has lost its original coating, and the coating under that just about everywhere. The place where my finger touches the ring the most has even eroded some of the metal, or at least, that’s what I think has happened based on how it looks (if i remember, I’ll take a photo in daylight and post it)The pin that holds the ring attached to the base has come out of one end, but still holds it all together from the remaining end.I’ve super glued the ring onto the back of my case as after some time it just didn’t hold any longer; probably because of the shungite pieces I’ve shoved inside my protective case and not because of the ring itself. It just hasn’t got much hold with a back that’s bumpy and without super glue. Even so, i still use it and love it as i did 2 years ago and so far this has been my longest lasting phone ring ever. I definitely recommend 2000%1st UPDATE:It is now several months since I purchased this ring. It is still working. I never bothered buying another ring from someplace else because I figured I had spent enough money trying to find a ring that doesn’t fall apart. I got used to the size of this one, and now its large-ness doesn’t seem an issue anymore. I had one sticker come loose on me in all this time. I couldn’t find my spares and contacted the seller to purchase some, but they were kind enough to send me replacements without asking me to pay for it. Customer service is top and so is this ring. It’s lasted longer than my previous 2 combined. The dark color has rubbed off in some places, exposing a copper finish, but I really don’t care about that.I also purchased one of those magnetic ring holders that you push onto your car air vent from somewhere else, and it holds really well as well. I’ve increased my stars from 3 to 5. I’ll definitely buy again, though it looks like I won’t have to for some time.Original review:The ring quality seems made very well and sturdy. I’ve only had it for about 2 weeks though, and my previous 2 (different brands) lasted about 4-6 months so it’s difficult to tell just how durable this ring is. But, so far, it looks very promising.Application was easy and the ring works well. I like that it came with more sticky circles to change into new phones, or smaller rings? -> My only problem is that the ring is huge! I can fit 2 fingers in down to my middle finger bones, which makes the ring rather useless for my skinny fingers. The diameter is 1.5 inches / 3 cm wideI’ve contacted the company a few days after receiving my ring asking if they have a smaller size I could exchange mine for, but have not yet received a response, despite their email stating that if I had any issues I’d receive immediate attention 🤨 hence the reduced stars. Obviously their customer service department cares less than they want us to think they do. Hopefully I can find a smaller ring and make it work as well as this one.